FRP Profile Round Pipe Square Tube Making Machine
Product description:
Hydraulic type FRP pultrusion machine is controlled by PLC, which adopts hydraulic pressure type to-and-fro as traction force with pneumatic length-fixing cutting. The machine can produce various FRP(including Glass fiber and Basalt fiber) Pultrusion Profiles such as square tubes, rectangular tubes, round tubes, angles, I-shapes, channel, rod, and rod fiberglass pultruded profile . The line consists of roving racks, resin bath, mould calibrating table, to-and-fro traction machine, cutting saw, racks for finished products and control system.
Equipment characteristic:
1. The machine adopts auto PLC controlling with stable performance and high automation.
2. The machine provides high precision temperature control system. The measurement and control of temperature is accurate with tolerance less than 1ºC.
3. the machine uses piston pump with low noise and high system pressure. The motor is low power and save energy.
4. The hydraulic cylinder adopts Germany sealing components with good sealing property and without oil leaking or impregnating.
5. Temperature alarm device, the temperature of hydraulic system is under strict control.
6. we can design various shape moulds according to customer's requirements.
7.The 20T widening pultrusion line can make profiles max.780x240mm(WXH)
More informations will be offered you when you contact us. Looking forward to hearing from you.
Traction machine-20T:
| Max range of clamping space: |
780mm (W) x 240mm(H) |
| Length of up and down clamping plate: |
400mm |
| Max traction force: |
200KN |
| Traction speed: |
0.1-1.0m/min |
| Max clamping force of traction heads: |
200KN |
| Max traction to-and-fro journey: |
500mm |
| Clamping journey: |
100mm |
| Traction cylinder: |
HSG D125X500 |
| Clamping cylinder: |
HSG D125X100 |
| Oil pump power: |
380V/50HZ 2x3KW |
| Circulating cooling water pump: |
220V/50HZ 1.5KW |
| Dimension: |
≈4800mm(L) x1150mm(W) x1750mm(H) |
Traction machine-30T:
| Max range of clamping space: |
1080mm (W) x 240mm(H) |
| Length of up and down clamping plate: |
400mm |
| Max traction force: |
300KN |
| Traction speed: |
0.1-1.0m/min |
| Max clamping force of traction heads: |
300KN |
| Max traction to-and-fro journey: |
500mm |
| Clamping journey: |
100mm |
| Traction cylinder: |
HSG D125X500 |
| Clamping cylinder: |
HSG D125X100 |
| Oil pump power: |
380V/50HZ 2x3KW |
| Circulating cooling water pump: |
220V/50HZ 1.5KW |
| Dimension: |
≈4800mm(L) x1150mm(W) x1750mm(H) |
Main technical parameter
|
- Center height 1000mmTotal power (not including mould heating power) ≈4.1KWAir pressure 0.4-0.6MpaGas consumption ≈20L/minDimension ≈28000x1300x1450mm
|
| Equipment characteristic |
- The machine is designed according to the small section hollow profile; it had the features of steadily to operate and marked energy saving effect. The chain guide rail is UHMWPE, and the rail had strong wearability, it can prevent the products from polluting.Adopting wear resistant polyurethane press block, double strand chain. The whole open-shut model traction frame can effectively assure the traction force and the products with the same direction and it is convenience to adjust.The inverter is imported from Japan, Mitsubishi PLC is adopted in speed adjustment of the pulling device, realizing infinite speed variation.The machine can realize fix-length cutting.
|
Details Show Of Our FRP Profile Pultrusion Machine
Packaging and Shipping:
Nude Packing or According to Customer′s Requirement
Delivery time:
45 days after receipt deposit
Payment Term:
T/T 30% deposit , 70% balance by T/T paid off before delivery after customer finished inspection in our factory; Or L/C at sight with irrevocable.
Our Services:
as requested by buyer, seller may send 1-2 technicians to buyer's factory for installation and adjustment , buyer should afford technician's round air tickets, room and board, safety, commission of everyone is usd60.00/day.
About our company:
Our FRP pultrusion Machines have exported to Iran, Ukraine, united Arab emirates, Russia etc.
If you are interested in our products above. Kindly let us know by return email. Then we will reply you immediately with detailed catalogue and quotations. Of course, welcome to visit our factory!
Qingdao Zhihongda Machinery co.,ltd, Except the FRP Profile Pultrusion Machine, We can also design and manufacture all kinds of Rubber machinery. Such as vulcanizing press, rubber extruder etc. We have a group of professional engineers who engaged in this field for more than 15 Years in charge of designing,manufacturing, installing,testing. So we can guarantee that our machines will be running with good performance based on high quality. Good after-sales service will be satificated with you.
Qingdao Zhihongda Machinery Co.,Ltd located in Qingdao City.You can fly to Qingdao Liuting airport,then we can pick you up to our facotry to visit.Warm welcome to visit us.
Contact person: Zhang meihua
Thank you for your attention!
Welcome to Contact with me !!
Audited Supplier 
){kind=link}