Electric Motor Stator Coils Drying Oven

• Customization: Available
• After-sales Service: Lifelong
• Warranty: 12 Months
• Model NO.: 3000x2000x2380
• Movement Way: Fixed
• Atomization: Electrical Heating
• Flow: Contra-Flow
• Heating Mode: Convective
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Heating Method: Electrical Heating
• Type of Shipping: by Air or Sea
• Transport Package: Wooden Case or Other
• Specification: 1300x1300x1100mm
• Trademark: ZHIHONGDA
• Origin: China
• HS Code: 8514200090
• Production Capacity: 600 Set/Year

Product Description

Electric Motor Stator Coils Drying Oven
 

 

Product introduction
Name: Electric Motor Drying Oven
Model: 3000×2000×2380 (DXWXH)

Application:
Electric Motor Stator Coils Drying Oven is mainly used for drying and curing large Transformer, Motor Stator Coils and other power equipment, the curing ovens heating speed is fast, energy saving and efficient. Flat car can be designed according to the user's workpiece load, safe and reliable.

Technical parameters:

Product name	Electric Motor Curing Oven	Model	3000×2000×2380
Working temperature scope	Room+10~300ºC	Working room size	3000×2000×2380mm( DxWxH) Note: The height from the flat car surface to the inner top is 2000mm
Heating power	60KW	Temperature control precision	±1ºC
Heating component	stainless steel electric heating tube	Uniform temperature	±2ºC(no-load)
Motor power	1100W * 6sets	Inner device	Stainless steel flat car with light rail wheels, 1 set, loading capacity up to 6000 kgs
Structure	1.The hot air ovens adopt both sides air duct out of the wind, horizontal cyclic heating. Heating elements are installed in the air ducts of both sides of the oven, motors are installed on the top of the oven, door buckles are fixed by buckle handle. 2.Internal oven with 2 groove channels. It is very easy to push in or out of the trolley.
Interior	material is adopted SUS304 stainless steel plate, Exterior material is made of A3 cold-pressed carbon steel plate with fine powder coating treatment.
Thermal insulation material	1. Thermal insulation layer of door: high temperature resistant silicone strips forced tight (If the temperature over 220 ºC, it should be adopted the aluminum silicate strips) 2.Between the inner and outer walls of the equipment are filled with high-temperature resistant aluminum silicate, which is used for heat insulation and heat preservation. Thickness 100mm.

 

Product display


The height from the flat car surface to the inner top is 2000mm (Efficient use of space):

Stainless steel electric heating tube and High temperature resistant extension shaft motor:


Heavy duty heats resistant wheels:

Matters need attention:
1.Our oven is equipped with phase sequence protection. If the power is switched on and the fan is not working after the fan switch is pressed, you only need to exchange any two fire wires among the three power lines
2.When there is a sudden power outage, turn off the heating switch to prevent automatic start on incoming calls.


Our Services:  

 1. Good knowledge of different markets can meet special requirements. 

3. Strong professional technical team ensure to produce the top-quality products.

3. Special cost control system ensures to provide the most favorable price.

4. Rich experience in this hot air oven field.

Shipment and Delivery:
Our company has professional forklift workers responsible for the shipment of goods to ensure the safety of the goods.

QUALITY CONTROL:

We have quality inspectors on the production line. All products must be inspected before delivery.
1.All the raw materials were inspected as soon as they arrived at our factory.
2. Check all purchased parts and brands and all details during the production process.
3. Check all welding and installation details during the production process.
4. The quality and packaging of all products shall be subject to final inspection upon completion

FAQ:
1. When can I get the quotation? 

We usually quote within 24 hours after we get your inquiry and understand all your requirements. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
 
 
2.Can you do the design for us? 

Yes. We have a professional team having rich experience in design and manufacturing.

3.What about the lead time for production? 

25 working days for mass production. It depends on your quantity, and we will try our best to meet your needs.
 
4.What are your terms of delivery?

EXW, FOB, CFR, CIF, etc.

We warmly look forward to your consultation. It's my pleasure to serve you.
Thanks for your attention!