Prepreg Electric Motor Stator Coils Hot Air-Drying Oven
Product introduction
Name: Motor Stator Coils Drying Oven
Model: 3000×3000×3100 (DXWXH)
Application:
Prepreg Electric Motor Stator Coils Hot Air-Drying Oven adopts the unique hot air circulation system to make the temperature distribution of the workroom even, the whole process of air change with large volume and the unique pre-air change function, so that the flammable gas concentration of the paint in the oven is always within a safe range. It is a kind of heating and drying equipment specially designed for the paint soaking industry. Widely used in motor dip, motor repair, transformer dip, plastic grease hardening, enamelled wire curing, motor rotor drying.
Technical parameters:
The motor curing oven is designed as a whole, blower motors are installed on left and right sides, this design can ensure the oven height in the highway limit range, convenient transportation. Very Perfect!
Product name |
Hot Air Oven |
Model |
3000×3000×3100 |
Working temperature scope |
Room+10~200ºC |
Working room size |
3000×3000×3100mm( DxWxH) Note: The height from the flat car surface to the inner top is 2700mm |
Heating power |
90KW |
Temperature control precision |
±1ºC |
Heating component |
stainless steel electric heating tube |
Uniform temperature |
±2ºC(no-load) |
Blower motor power |
1100W * 6sets
|
Inner device |
Stainless steel flat car with light rail wheels, 1 set, loading capacity up to 10 Tons |
Structure |
1.The hot air ovens adopt both sides air duct out of the wind, horizontal cyclic heating. Heating elements are installed in the air ducts of both sides of the oven, motors are installed on the top of the oven, door buckles are fixed by buckle handle. 2.Internal oven with 2 groove channels, it is very easy to push in or out the trolley. |
Interior |
material is adopted SUS304 stainless steel plate, Exterior material is made of A3 cold-pressed carbon steel plate with fine powder coating treatment. |
Product display
Inner material all stainless steel
Stainless steel electric heating tube and High temperature resistant extension shaft motor:
Heavy duty heats resistant wheels:
Structure advantages:
·Thermal insulation material
Between the inner and outer walls of the equipment are filled with high-temperature resistant aluminum silicate, which is used for heat insulation and heat preservation
·Controller
LED digital intelligent instrument temperature control, arbitrary set constant temperature, simple operation, accurate temperature control.
·Internal structure
SUS 304 stainless steel is used inside to prevent rust and make it durable.
·Custom-made large centrifugal blades
Forced air circulation system to ensure that the temperature distribution inside the oven.
·Outlet
Specially designed outlet, exhaust outlet can be equipped with ventilation device.