Hot Air-Drying Oven for Mold Preheating
Product introduction
Name: Hot Air Oven for Mold
Model: 4000×3000×3400 ( DxWxH)
Descriptions
Mold Preheating Hot Air-Drying Oven is widely used in the molding, preheating, heating, drying, softening, curing and other processes of all kinds of mold making products.
Technical parameters
Product name |
Mold Preheating Oven |
Model |
4000×3000×3400 |
Working temperature scope |
Room+10~200ºC |
Working room size |
4000×3000×3400mm( DxWxH) Note: The height from the flat car surface to the inner top is 3000mm |
Heating power |
150KW
|
Temperature control precision |
±1ºC |
Heating component |
stainless steel electric heating tube |
Uniform temperature |
±2ºC(no-load) |
Blower motor power |
1500W * 8sets
|
Inner device |
One flat car with light rail wheels, loading capacity up to 15 Tons. |
Product display
Explosion-proof door:
An explosion-proof pressure relief door is set at the back of the oven. When the pressure inside the oven is too high, it will pop open automatically to relieve pressure
Products advantage
1.The SCR controls the heating power output ratio, Save energy and reduce costs.
2.Time setting device, HS48S-99.99 Timing device, manual/automatic switch, When the temperature reaches the set temperature, the timing will start. When the time reaches the set range, the heating power will be cut off automatically.
Packing & delivery
We offer below business term:
Accepted delivery terms |
FOB, CFR, CIF, EXW |
Accepted payment currency |
USD, EUR,CNY |
Accepted payment type |
T/T, L/C |
Nearest port |
Qingdao, Shanghai, Dalian, Tianjin,Ningbo etc. |
Our Service
A. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply the spare parts and technical support in & after the warranty time.
B. After-sales service
1. Technical support for your installation, operation and maintenance.
2. One year's warranty
3. Spare parts and technical support at most economic prices after the warranty.