Composite Hot Air Curing Oven for Carbon Fiber Parts

• Customization: Available
• After-sales Service: Lifetime Warranty
• Warranty: 12 Months
• Model NO.: 1000x1000x1500
• Movement Way: Fixed
• Atomization: Electrical Heating
• Flow: Contra-Flow
• Heating Mode: Convective
• Material Status: Powder
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Heating Method: Electrical Heating
• Type of Shipping: by Air or Sea
• Transport Package: Wooden Case or Other
• Specification: 1000x1000x1500
• Trademark: ZHIHONGDA
• Origin: China
• HS Code: 8514200090
• Production Capacity: 600 Set/Year

Product Description

 

Composite Hot Air Curing Oven for Carbon Fiber Parts
 

Product introduction
Name: Composite Hot Air Curing Oven 
Model:1000x1000x1500 (DXWXH)

Application:

Carbon Fiber Composite Hot Air Curing Ovens are widely used in Automotive, Aviation, field.
The products produced have high strength and high corrosion resistance and long service life. It has broad prospects for development.

While carbon fiber parts are curing in the oven, it needs to pull the air out with very low pressure. So, the oven should be added vacuum valve and vacuum gauge and vacuum pump and vacuum pipe etc device. Customers can prepare the vacuum parts locally; we just provide the oven with reserved vacuum sockets. That would be ok.

Technical parameters:
 

Product name	Hot Air Curing Oven	Power supply	380V 50HZ 3P (Based on user's power)
Working temperature scope	Room+10~300ºC	Working room size	1000×1000×1500mm( DxWxH)
Heating power	15KW	Temperature control precision	±1ºC
Heating component	stainless steel electric heating tube	Uniform temperature	±2ºC(no-load)
Motor power	1100W * 1sets	Inner device	1.Removable stainless-steel screen-tray, 2 pcs. Load of per tray 200kg 2.Total 4 vacuum ports reserved on the same side of oven, two ports per tray.  Note: vacuum valve and vacuum gauge and vacuum pump will be prepared by the buyer.
Structure	1.The hot air ovens adopt both sides air duct out of the wind, horizontal cyclic heating. Heating elements are installed in the air ducts of both sides of the oven, motors are installed on the top of the oven, door buckles are fixed by buckle handle.  2.Internal oven without 2 groove channels, without the trolley.

Intelligent temperature controller fully programmable.
1.30 segment program control, PID automatic adjustment.
2.Can be set according to the actual needs of the heating speed, cooling speed.
3.Can display Temperature and Time curve diagram
4.Output:RS485 (can be connected with computer to print)
5. English and Chinese interface can be switched.

Temp-Time curve graph Template:


Product display


If you have an interest in our ovens, please contact us. And inform your detailed request, such as:
1.Working room size ( DxWxH)
2.Max. working temperature
3.Shelves number inside the oven
4.Trolley with or not
5.Reserved vacuum ports number
6.Power supply in your country
Then we will calculate the exact price for you.
If you also want to know the shipping cost, please tell your destination port. We will give you a satisfactory reply as soon as possible.
Looking forward to serving you!