Silicon Rubber Post Curing Oven
Product introduction
Name: Rubber Post Curing Oven
Model: 1750×1200×1350 ( DxWxH)
Descriptions
Silicon Rubber Post Curing Oven adopts energy saving and environmental protection new heating technology, so it pays more attention to energy saving and security. When it is absorbed by the heating material, it can become the heating energy, which can shorten production cycle and improve the quality of production. It is an ideal and bright prospect dryer equipment with convenient and obvious effect.
Technical parameters
| Product name |
Hot Air Oven |
Model |
Customized |
| Working temperature scope |
Room+10~200ºC |
Working room size |
1750×1200×1350mm( DxWxH) |
| Heating power |
21KW |
Temperature control precision |
±1ºC |
| Heating component |
stainless steel electric heating tube |
Uniform temperature |
±2ºC(no-load) |
| Motor power |
1100W * 2sets |
Inner device |
Stainless steel flat car 1 set, loading capacity more than 1000kgs |
| Interior |
material is adopted SUS304 stainless steel plate, Exterior material is made of A3 cold-pressed carbon steel plate with fine powder coating treatment. |
| Thermal insulation material |
1. Thermal insulation layer of door: high temperature resistant silicone strips forced tight (If the temperature over 220 ºC, it should be adopted the aluminum silicate strips)
2.Between the inner and outer walls of the equipment are filled with high-temperature resistant aluminum silicate, which is used for heat insulation and heat preservation. Thickness 100mm. |
Product presentation
Package and Delivery
FAQ
•1. Q: Are you a factory or trading company?
• A: we are a factory, professional in manufacturing various kinds of ovens.
• 2. Q: Why choose us?
• A: We have rich experience engineers; we can provide you the reliable quality products while at reasonable prices.
• 3. Q: How to get the quotation?
• A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
• 4. How about your packing and shipment?
• A: Products would be covered with pe film then put them into the standard wooden case, By Sea or by Air are available.
• 5. Q: What's the Payment method?
• A: Standard model 30% by T/T in advance, 70% balance by T/T paid off before shipment.
Customized model 40% in advance. 60% balance by T/T paid off before shipment
• 6.Q: Where is your factory?
• A: Our factory located in Qingdao city, Shandong, China. Welcome you to visit our factory.
It takes about 1.5 hours to drive from Qingdao airport.
• 7.Q: What's the warranty time?
• A: Our warranty time is 12 months after the machine has been arrived at buyer's factory, during guarantee period, the cost of any spare parts or new accessory should be borne by the seller; Beyond the warranty period we only charged for the cost of spare part.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}