Direct Deal Industrial Heater Hot Air Drying Oven with Legs

• Customization: Available
• After-sales Service: Lifetime Warranty
• Warranty: 12months
• Model NO.: 1000x1000x1000 (DXWXH)
• Atomization: Gas Atomization
• Flow: Contra-Flow
• Heating Mode: Convective
• Material Status: Powder, Bulk
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Volage: 220--660V
• Transport Package: Standard Wooden Case
• Specification: Customer customization
• Trademark: ZhiHongDa
• Origin: China
• HS Code: 8514200090
• Production Capacity: 1000sets/Year

Product Description

                         Industrial Heater Hot Air Drying Oven with Legs


Industrial Heater Drying Oven with legs
Model:1000x1000x1000 (DXWXH)


 Application:




 Industrial Heater Hot Air Drying Ovens are widely used in drying industry, such as Industrial polyurethane. natural rubber and silicone rubber products etc.

Timing device, manual/automatic switch, When the temperature reaches the set temperature, the timing will start. When the time reaches the set range, the heating power will be cut off automatically. but the blower motor does not stop rotating to help the cooling inside of the oven.

Technical parameters:

 

Product name	Hot Air Oven		1000×1000×1000
Working temperature scope	Room+10~300ºC	Working room sizeModel	1000×1000×1000mm( DxWxH)
Heating power	15KW	Temperature control precision	±1ºC
Heating component	stainless steel electric heating tube	Uniform temperature	±2ºC(no-load)
Motor power	1100W * 1set	Inner device	2 Stainless steel punched-tray. Loading capacity 100kg/tray.
Structure	The hot air ovens adopt both sides air duct out of the wind, horizontal cyclic heating. Heating elements are installed in the air ducts of both sides of the oven, motors are installed on the top of the oven, door buckles are fixed by buckle handle. The electric control cabinet is installed on the left side
Material	Interior material is adopted SUS304 stainless steel plate, Exterior material is made of A3 cold-pressed carbon steel plate with fine powder coating treatment.
Thermal insulation material	1. Thermal insulation layer of door: high temperature resistant silicone strips forced tight (If the temperature over 220 ºC, It should be adopted the aluminum silicate strips) 2.Between the inner and outer walls of the equipment are filled with high-temperature resistant aluminum silicate, which is used for heat insulation and heat preservation.Thickness 100mm.

Products show:





























     Our Service


A. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply the spare parts and technical support in & after the warranty time.
3. We supply the training course to your workers at our factory if you need.

B. After-sales service
1. Technical support for your installation, operation and maintenance.
2. One year's warranty
3. Spare parts and technical support at most economic prices after the warranty.

The hot air curing ovens can be customized.
If you want to place an order, first please provide the following parameters:
1.Working room size of the oven (DxWxH)
2.What products will be dried or cured by the oven
3.What is the max. working temperature
4.Shelves number inside the oven
5.If you need one cart (trolley) with shelves to push into the oven
6.What is the power supply in your country
Please kindly inform above,then we can calculate the cost.

We are looking forward to your inquiry.
Hope we can establish long term business relationship wi